DMG 3200/3100/3000 – User Manual
Page 233 (306)
Figure 8.44 –
Universal Transcoder- Multiscreen profiles –mode selection
8.6.3.1 Support for Broadcast Profiles (576i/1080i)
In the Universal Transcoder- Multiscreen profiles, it is possible to select Broadcast based
profiles. In order to configure these, the following modes must be selected:
• 576i is only available in Mode 8
• 1080i is only available in Mode 1
Please note that the broadcast profiles have the same GOP length (due to Key Frame
Alignment) as the Progressive profiles.
8.6.4 Configuration Copying
This feature enables the user to copy a configuration from one Universal Transcoder-
Multiscreen
to another. This feature is useful whenever the same set of profiles is to be
configured on several modules.
To Next Page
Loading...