DMG 3200/3100/3000 – User Manual
Page 175 (306)
Figure 7.65– TOT Settings Dialog
The following fields are displayed for TOT Entries settings:
Country Code
DVB country code. See the Alpha-3 code listed at
http://en.wikipedia.org/wiki/ISO_3166-1 for more information.
Region ID
DVB region. See ETSI EN 300 468 for more information.
Timezone
Region
If installed, set the correct timezone region.
It is also possible to select Manual and specify these values.
Local Time
Offset
Current offset (from GMT/UTC)
Next Time Offset
Next offset (from GMT/UTC), e.g. Summer Time can be expressed as
+1 hour.
Time of Change
Time (GMT/UTC) when the transition takes place and the Next Time
Offset becomes valid.
The TOT settings offer the possibility to configure any future changes in time, such as Summer
Time and leap years, in two sections – Local Time Offset Change and Time of Change. For
more information, refer to ETSI EN 300 468 v1.7.1 (2006-05) Digital Video Broadcasting
(DVB); Specification for Service Information (SI) in DVB systems.
It is also possible to enter Manual changes, but these entries will not be
automatically updated.
This information is used to generate the TOT and automatically update the table
on the next time of change.
7.6.6 PSI Synchronization
To Next Page
Loading...