DMG 3200/3100/3000 – User Manual
Page 162 (306)
Figure 7.50 - Transport Tab for the Virtual QAM Output
Figure 7.51- Port Settings Tab for the Virtual QAM Output
7.5.3 MPTS Transparent Mode
With MPTS Transparent Mode, an input stream is forwarded to the output without any
processing, i.e. output equals input, including null packets (for modulated outputs, null packets
will be removed and re-added to exactly fit the configured modulation bit rate).
When setting up a transparent stream, the Add MPTS button is not used. As with an SPTS,
simply drag an MPTS from the list of available MPTS’s over to the output pane. In the output
pane, the name of a stream will indicate whether it is transparent or not (as shown in the figure
below).
To Next Page
Loading...