Sencore DMG 3200 - PSI Modifications of Input Services; Defining a Component Type for an Incoming PID

DMG 3200/3100/3000 – User Manual
Page 52 (306)
Figure 5.11 - Verifying manually defined Inputs
If manual PSI is defined for an input port, all incoming services must be defined.
It is not possible to define only one service manually and use the incoming PSI
to represent the rest.
5.3.2 PSI Modifications of input services
This PSI modification feature allows the user to modify existing incoming PSI, keeping
the other PSI information intact. The feature is currently implemented to solve two
specific scenarios.
• Add signaling to incoming “DVB Subtitling” and “EBU teletext” components in PMT.
Other component types can also be added but without any descriptors only.
• Change audio language descriptor of an incoming audio component.
5.3.3 Defining a component type for an incoming PID.
To define the PSI for an incoming PID
1) Select the input reference from the Input->PSI navigation Page.
2) Press the Add button and insert the appropriate information.