Sencore DMG 3200 - Subtitling Parameters

DMG 3200/3100/3000 – User Manual
Page 223 (306)
Level
Audio level can be set from -6dB to + 6dB, 1dB step
Audio Source
Select the audio PID to be transcoded based on either language or a more
advanced priority list.
• “Select Any Language” - a random language in the original service.
• “Current languages” - select from a list of incoming audio languages.
• “Advanced Selection” - possibility to set up a prioritized selection
based on codec type, PID value and/or language
8.5.8 Subtitling Parameters
The user can adjust the subtitle language priority on type basis. If a service contains both
DVB subtitling and EBU subtitling on same language, the transcoder will select subtitling
source based on the type priority configured.
Figure 8.36-
Universal Transcoder- dense broadcast subtitling parameters
Sub Burn-in 1
st
Language
Specify the 1
st
Language for Sub Burn in from drop down list.
Sub Burn-in 2
nd
Language
Specify the 2
nd
Language for Sub Burn in from drop down list.
Priority
Specify the Subtitling Selection Priority.
Please note that there is a limit of 4 subtitle burn-in components per module