DMG 3200/3100/3000 – User Manual
Page 191 (306)
Figure 8.7– VBI/VANC configuration for Encoders with line filter
Figure 8.8– VBI/VANC configuration for Encoders with line filter
A PID can be created by clicking on the “Create pid” button and it is possible to create up to 3
unique PIDs. The figure above shows the GUI to configure the Data information and Page
information. Click on the “Create datatype” button to add a new data type. If the data type is
teletext, click on the “Create page” button to create page information for the descriptor.
Only one PID definition is displayed in detail. To show another definition, click on the PID
header.
The following parameters are available for VBI/VANC configuration:
PID
Private Data PID value. Range: 32-8190
Data Type
Options: Teletext, WSS or VPS
To Next Page
Loading...