EasyManua.ls Logo

Sencore DMG 3200 - Page 156

Sencore DMG 3200
306 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DMG 3200/3100/3000User Manual
Page 156 (306)
The following parameters are available:
Frequency
47 862MHz
Constellation
Choose either:
QPSK
QAM16
QAM64
RF Level
-10 +2.2dBm
Bandwidth
5, 6, 7, or 8MHz
Inner Code
1/2, 2/3, 3/4, 5/6, or 7/8
Tx Mode
2K or 8K
Guard Interval
1/32, 1/16, 1/8, or ¼
CW Carrier
Enables Continuous wave signal, disable modulation and only output
a single carrier at the configured frequency (for test only).
Inverted Spectrum
Enables Inverted Spectrum on Output signal.
Bitrate and Symbol rate cannot be modified as these two parameters are dependent on other
modulation parameters; hence they are calculated accordingly. In addition, the RF level is
subject to change in future releases refer to the most recent data sheet for the correct value.

Table of Contents