DMG 3200/3100/3000 – User Manual
Page 178 (306)
Service ID – DVB service ID of desired output service
Component – input PID of an elementary_stream (not
remapped value)
All drop down boxes provide a list of currently available
options together with the option to manually define an explicit
value. After manually defining a value, click Next to continue
the configuration process.
Individual table placement instructions are provided in the
Generic Descriptor Loop Placement Instructions below.
Hex Data
The descriptor in HEX format without a leading “0x”. This should
contain the correct 2 byte tag and 2 byte length. Descriptors with
invalid descriptor_length will be rejected.
Action
Depending on the current configuration step, one of the following
buttons will be displayed:
Next – displayed when defining a new descriptor; click to validate the
descriptor.
Retry – displayed when a new descriptor fails descriptor_length
validation; correct the error and click to retry validation.
Add – displayed when a new descriptor passes descriptor_length
validation; click to add the descriptor to output PSI.
– Click to remove a previously defined descriptor
To Next Page
Loading...