Sencore DMG 3200 - Page 226

DMG 3200/3100/3000 – User Manual
Page 226 (306)
Click edit and the Universal Transcoder- Multiscreen configuration pages will be displayed. The
configuration parameters are organized into different sections selectable from the tab menu on
top. Source Parameters
This page is used to configure the input source parameters for each Universal Transcoder-
Multiscreen path.
Figure 8.39 –
Universal Transcoder- Multiscreen Source configuration
The following parameters are available for source configuration:
Main Source
Select the service to be transcended into multiscreen profile.
Backup Source
This list displays the source available for the chosen backup service.
Switching mode
This list displays the available switching mode:
• Off
• Once
• Floating
• Reverting
Descrambler
This list displays the available descramblers for the descrambling the
vice.
Frame Rate
This list displays below options of Expected frame rate:
• 59.94 fps
• 50 fps
• 29.97 fps
•
25 fps