Sencore DMG 3200 - Page 229

DMG 3200/3100/3000 – User Manual
Page 229 (306)
Figure 8.42 – Universal Transcoder- Multiscreen Audio Parameters
The following parameters are available for Audio configuration:
Encoder Type
The output codec type. MPEG-1, AAC-LC, HE-AACv1 and HE-
AACv2 are supported
Container
AAC container. LATM and ADTS are supported.
Pes Alignment
Enable or Disable Pes Alignment
Sample Rate
The sample rate of the output. The audio is sample rate converted.
Bit Rate
Supported range of bit rates for each codec. See details per codec in
below sections.
Channel Mode
Currently only stereo is supported.
Audio Source
Select the audio PID to be transcoded.
“Select Any Language” - a random language in the original service.
“Current languages” - select from a list of incoming audio languages.
The codec specific parameter values are as follows:
MPEG-1 encoder
MPEG-1 layer II
Bitrate
64-384 kbps
AAC encoder
AAC-LC/HE-AACv1/HE-AACv2
Bitrate
32-384 kbps (LC-AAC)
32-192 kbps (HE-AACv1)
32-96 kbps (HE-AACv2)