DMG 3200/3100/3000 ā User Manual
Page 280 (306)
The configuration for MMI Redundancy is available under the Redundancy -> MMI page in the
GUI.
Figure 10.32 ā Twin MMI IP address configuration
First the twin MMI IP address must be set, as MMI Synchronizer works based on an external
Ethernet connection between both MMIs.
The 'Card status list' shows all cards that are currently logged in and their status. After setting
twin MMI IP on both MMI modules, you will see the following new rows available for
configuration on the main MMI page:
To Next Page
Loading...