Step by step
General settings
100
r w Press this key.
Initial status for programming mode.
Deleting an extension
Required: Programming mode must be activated (*95
31994).
dlm w Enter the programming code.
e or f Select group 1 or 2.
q w Deletes the music source extension.
r w Press this key.
Initial status for programming mode.
External music source - extension assign-
ment
With this feature, Music On Hold can be played from au-
dio equipment connected to an extension slot.
By default, no extension is configured.
Required: Programming mode must be activated (*95
31994).
djh w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
or
q w Deletes the music source extension.
w Initial status for programming mode.
Setting the time for an external room
monitor
This setting specifies a timeout for the automatic dis-
connection of a call, in order to enable a Room Monitor
(Babyphone) from an external telephone.
The extension specified is deactivated when the
External music source - extension assignment
Option is configured.
To Next Page
Loading...
