Programming an extension
69
Step by step
g
= Number only
w Initial status for programming mode.
Override
This settings allows an extension to override another
extension when there is a conversation in progress.
When this is done, the call that is overridden receives a
warning tone.
Required: Programming mode must be activated (*95
31994).
ehh w Enter the programming code.
p w Enter the extension number (e.g. 12/102).
d or e w Enter a permission type:
d = no permission to override (default)
e = with permission to override and sending warning
tone
p w Enter the next extension number.
or
r w Press this key.
Initial status for programming mode.
Silent monitoring
This feature allows an extension to override another ex-
tension without sending a warning signal to the parties
having a conversation (for certain countries only).
Required: Programming mode must be activated (*95
31994).
dhj w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
Within the system, an override has the same lim-
itations as a conference or silent monitoring, that
is, a maximum of 2 simultaneous overrides are
allowed. Important: The Silent monitoring fea-
ture is ticketed as an Override.
To Next Page
Loading...
