Step by step
Report
130
Report
Information about calls received and made is stored in
the system’s memory HiPath 1100. CDR records can be
reviewed in the following manner:
• By using a PC or printer connected through a serial
interface.
• By using a PC connected on a local network.
The tickets list can be viewed on a Billing Application
installed in the PC or through Windows’ Hyper Termi-
nal.
• For the Windows’ Hyper Terminal the HiPath 1100
provides local control of ticket purchasing at any
time through a series of commands that can be pro-
grammed into the application interface with the
switch.
– Interface commands:
Command Description
\nticket_start\n This command will be sent by the
user (Application) to the PABX, re-
questing that the stored tickets start
being sent.
\nticket_stop\n This command will be sent by the
user (Application) to the PABX, re-
questing that the stored tickets stop
being sent.
After receiving and accepting those commands,
new tickets or tickets that are still stored will not
be transmitted to the PABX.
To Next Page
Loading...
