Step by step
Programming an extension
80
Assigned group
With this feature you can associate several extensions
to one Executive telephone. There are 8 groups avail-
able with 16 extensions for each group. An associated
group is assigned to each master telephone. To ensure
proper operation all extensions must have system tele-
phones installed. An extension can be assigned to mul-
tiple groups simultaneously.
By default no associated group is configured.
Required: Programming mode must be activated (*95
31994).
eie w Enter the programming code.
p w Enter an extension for the master telephone (e.g., 11/
101).
p w.pw Specify up to 15 extensions as secretary telephones
(e.g: 12/102).
r w Press this key.
Initial status for programming mode.
Delete associated group
Required: Programming mode must be activated (*95
31994).
eie w Enter the programming code.
p w Enter an extension for the master telephone (e.g., 11/
101).
q w The master telephone extension is deactivated.
r w Press this key.
Initial status for programming mode.
CD interface assignment
Assigning CD ports to extension slots allows system
telephones to be connected to the PABX.
Required: Programming mode must be activated (*95
31994).
ehj w Enter the programming code.
de ... fh w Enter a number from 01 to 24 for the CD port.
de to dh= for the HiPath 1120
To Next Page
Loading...
