Summary of programming codes
230
Summary of programming codes
Start the programming mode: nor
g
qmi p Password: 31994 + Code
Programmed Function Code Default Settings
Important settings Æ page 20
Dialing mode on an analog trunk Æ page 23 119 2 (MF) for analog lines
Default access to a group of external
lines Æ page 23
002 0 for all extensions
Analog line attendants Æ page 24 142 None
Phonebook/Speed Dial Æ page 26 112 All slots are empty
Denied list Æ page 27 123 Default permission and
denied lists Æ page 29
Permission list Æ page 28 124
Permission for using speed dial numbers without
COS analysis Æ page 31
072 # (deactivated)
Assigning a class of service (COS) Æ page 32 111 77 (for all extensions)
Special class of service for a blocked
extension Æ page 34
096 0 (for all extensions)
COS changeover Æ page 36 178 # (blocked)
Language Æ page 20 164 3 (for all systems)
Country/group of countries Æ page 20 165 01(Brazil)
Attendant console Æ page 36 150 None
Carrier selection mode: LCR or ACS Æ page 37 225
*
(activated)
Warning tone for calls without LCR Æ page 37 092 # (deactivated)
Activating the time for LCR fallback Æ page 39 250 # (deactivated)
Time for LCR fallback Æ page 40 251 05 seconds
External line settings Æ page 41
Groups of external lines Æ page 41 156 0 (access to all lines)
Overflow for a group of external lines Æ page 42 099 1 - First
2 - All
3 - None
To Next Page
Loading...
