General settings
125
Step by step
PABX Trace log
PABX Trace is a tool used to monitor the events that
have occurred in the PABX during a certain period. This
code allows you to configure the profiles to be moni-
tored using the trace.
The trace can be started/ended using the HiPath 1100
Manager or the feature codes (see User Manual).
The default setting is trace not configured.
Required: Programming mode must be activated (*95
31994).
fhj w Enter the programming code.
de.eg Enter the code of the profile:
de - Analog extensions
df - Analog trunks
dg - optiPoint extensions
dh - KS extensions
di - ISDN telephones
dj - ISDN trunks
dk - Voice mail
dl - CLIP/FDW
dm - Internal connections
ed - Sensor/Relay
ee - ISDN/CAS Layer 3;
ef - ISDN Layers 1 and 2;
eg - optiPoint Layers 1 and 2.
or
q w Press the key to delete the current configuration.
or
Wait 5s
w Initial status for programming mode.
After switching off or updating data you do not
need to reconfigure the trace, although only the
configuration and the status will be saved. The
data will be lost when any of these events occur.
To Next Page
Loading...
Need help?
General