Step by step
Digital trunk settings
160
External line prefix
This setting specifies the prefix for the PABX external
lines, for domestic and international calls. By default,
the type of a programmed call is not specified.
Required: Programming mode must be activated (*95
31994).
elm w Enter the programming code.
e or f w Select the type of call:
e = National
f = International
p Enter the line prefix (up to 5).
r w Press this key.
Initial status for programming mode.
External number registration
To use the attendant feature each MSN must be regis-
tered to a specific slot.
If the prefix (Code 089) for these numbers has already
been configured, only the final digits need to be regis-
tered.
By default, no digits are specified.
Required: Programming mode must be activated (*95
31994).
eme w Enter the programming code.
dde . ehd w Enter a slot (001 ... 140).
p w Enter the MSN (up to 20 digits).
r w Press this key to confirm the entry.
(After entering 20 digits, the entry mode exits automat-
ically.)
dde . ehd w Enter the next slot.
or
r w Press this key.
Initial status for programming mode.
To Next Page
Loading...
