Siemens HiPath 1120 Programming Manual

EVM module
175
Step by step
fee
w Enter the programming code.
p w Enter a number with a maximum of 10 digits (e.g., for
3415565 you can specify 341).
Wait 5 seconds
w Wait for a confirmation tone.
Initial status for programming mode.
Type of system number
This setting specifies how an MSN configuration must
be sent.
Required: Programming mode must be activated (*95
31994).
fef w Enter the programming code.
e ... h Select the type of number to be sent:
e = Unknown (default for other countries)
f = System number (default for Italy)
g = Local Area Code (LAC)
h = Country Area Code (CAC)
w Initial status for programming mode.
Type of voice mail
This setting specifies the type of voice mail to be used
by the system.
Required: Programming mode must be activated (*95
31994).
feh w Enter the programming code.
e ... g Select the type of voice mail:
e = None (default)
f = VMI
g = EVM
w Initial status for programming mode.

Siemens HiPath 1120 Specifications

General

Brand	Siemens
Model	HiPath 1120
Category	Telephone
Language	English