Relay and sensor on the HiPath 1120
177
Step by step
e
... g Select the audio quality option desired:
e = Best quality for greetings and messages
f = High quality or greetings / Best for messages (de-
fault)
g = Hig quality for greetings and messages
w Initial status for programming mode.
Greeting for an analog trunk
This specifies whether a message/greeting should be
played for an analog trunk.
Required: Programming mode must be activated (*95
31994).
fgd w Enter the programming code.
p w Enter a number for an analog trunk (e.g., 801).
e or f Select a Message:
e = Greeting 1
f = Greeting 2
r w Press this key.
Initial status for programming mode.
Relay and sensor on the HiPath
1120
You can connect a music module to the HiPath 1120
system. This module also provides a Relay and a Sensor
for integrating other devices such as an entrance tele-
phone, a door opener etc.
Sensor
When the status of the sensor contact changes, for ex-
ample, when an open contact closes, the following
functions can be executed:
• Selecting a number in the speed dialing Directory
• Activating a relay
To Next Page
Loading...
