Step by step
Programming an extension
88
This defines a time limit for making external calls on
each extension. In other words, when the total time of
the external calls made reaches the time limit set for
calls underway, these calls will be interrupted and no
further calls may be made until more time "credit" is
awarded.
Activate/Disable timeout for external calls
Required: Programming mode must be activated (*95
31994).
fgm w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
q or r w Activate/Disable the timeout for external calls:
q = Activated
r = Deactivated (default)
w Initial status for programming mode.
Calls may also be interrupted if the extension has
been configured with these features:
• ”Timer for outgoing external calls”
Æ page 87, the timeout stops counting.
• ”Billing” Æ page 105, the call will only be
started or can continue if the time and credit
limit have not been reached.
For simultaneous calls, call times will be counted
separately.
If the call ends before a cycle is complete, the
time will be counted as if the call had completed
a 5-second cycle.
The ”Call deflection” Æ page 154 is not sup-
ported by this feature.
To Next Page
Loading...
Need help?
General