Programming an extension
75
Step by step
q
or r w To enable or deactivate permission for call forwarding -
Busy:
q = Activated
r = Deactivated (default)
p w Enter the next extension number
or
r w Press this key.
Initial status for programming mode.
Permission for conditional call for-
warding
This allows an extension to forward a call to an external
line.
Required: Programming mode must be activated (*95
31994).
fhk w Enter the programming code.
p w Enter the extension number (e.g., 12/102).
q or r w To enable/deactivate permission for external line call for-
warding:
q = Activated (default)
r = Deactivated
p w Enter the next extension number
or
r w Press this key.
Initial status for programming mode.
Dialing mode
Urgent call and callback when busy facilities do
not work when call forwarding - busy and call for-
ward no answer are activated.
If the extension called is configured to use Do
not disturb and call forwarding - Busy then the
call will be forwarded. If Do not disturb is activat-
ed at the destination to which the call is forward-
ed, the caller will hear a busy signal.
To Next Page
Loading...
