Siemens HiPath 1120 - Default Permission and Denied Lists

Important settings
29
Step by step
Required: Programming mode must be activated (*95
31994).
efh w Enter the programming code.
h or i or j w Enter the number for the permission list.
de ... fi w Enter the phonebook entry number for the number to
be allowed access.
p Enter the number that will be allowed access (up to 16
digits).
Warning: Enter the number without the external access
code.
Wait 5 seconds
w Wait for a confirmation tone.
Initial status for programming mode.
Deleting numbers from a permission list
Required: Programming mode must be activated (*95
31994).
efh w Enter the programming code.
h or i or j w Enter the number for the permission list.
of ... fi w Enter the list entry number of the number to be delet-
ed.
Wait 5 seconds If no new number is entered after 5 seconds, the con-
tent of that entry is removed.
w Initial status for programming mode.
Default permission and denied lists
For both permission lists and denied lists there are
some pre-programmed numbers that can be changed,
if necessary.
.
To change an allowed number, just enter its list
entry number and the new number.
Country Permission
list
Denied
list
Brazil 190
0800
193
0810
0900
900
Argentina