EVM module
173
Step by step
Mailbox greeting configuration
This setting specifies the type of greeting to be used for
a specific mailbox when the Type of greeting for a mail-
box features is configured as "Manual" (Option 1, Code
206).
Required: Programming mode must be activated (*95
31994).
fdk w Enter the programming code.
de ... fh Enter the number of the mailbox you would like to se-
lect.
e or f Select the type of greeting:
e = Greeting 1 - Day (default)
f = Greeting 2 - Night
r w Press this key.
Initial status for programming mode.
Message source
This setting assigns a message to one of the two EVM
ports. Alternatively, the message can be assigned to an
MSN.
Required: Programming mode must be activated (*95
31994).
fdl w Enter the programming code.
e or f Select a Message:
e = Greeting 1
f = Greeting 2
khme or khmf Enter the port to be used for the MSN message play-
back.
r w Press this key.
Initial status for programming mode.
The procedure for recording a greeting/message
is described in the User Manual.
To Next Page
Loading...
