General settings
103
Step by step
Digits configured with this feature cannot be dialed
when using a caller list.
For example,
The following number is stored in the caller list:
0893415000 and the digits specified for suppression
are 089 (area code).
When an external call is made from a caller list, the sys-
tem dials only the number 3415000. The code 089 will
not be dialed.
In the default configuration no digits are excluded.
Required: Programming mode must be activated (*95
31994).
eke w Enter the programming code.
p Enter the first digits (up to 6) that are not supposed to
be dialed when using a Caller List.
Wait 5 seconds
w Wait for a confirmation tone.
Initial status for programming mode.
Date/time - manual setting
The date and time can be shown on your system tele-
phone display. It is important to set the correct time/
date for recording call details.
Required: Programming mode must be activated (*95
31994).
eeh w Enter the programming code.
p Enter the date and time:
de.ge =Day, from 1 to 31
de.ef =Month, from 1 to 12
dd.mm =YY - Year, from 00 to 99
dd.fg = Hour, from 00 to 23
dd.im =Minute, from 00 to 59
For example, 0508990830 for 05/08/99, 08:30 a.m.
w Initial status for programming mode.
To Next Page
Loading...
Need help?
General