Siemens HiPath 1120 - Technical Data; Internal Entrance Telephone

Setup and Installation
228
Technical Data
Internal entrance telephone
1 Model S30817-Q930-A200
Additional components used include R1 resistance (1,2 k Ω / 0,25W / 5%),
R2 resistance (33Ω / 0,25W / 5%), and a C1 capacitor (1,0μF / 250 VAC /
non-polarized). The connection to the C.O. is made via two wires (A1 / B1)
while the connection to the entrance telephone interface is made via four
wires (A2 / B2, KL1, KL2).
Dimensions
(Length x Depth x Height)
18.50" x 14.56" x 2.83" (470 x 370 x 72
mm (1150 = 3.93"/100 mm)
Weight HiPath 1150: 8.04 lb/9.36 lb (3.65 kg/4.25 kg)
Maximum current: 1.5 A
Supply voltage: 110 - 230 V, Full Scale, 50/60Hz
Battery:
Type: Valve-Regulated Lead Acid (VRLA)
Connections: Faston connector
Voltage: 27.2V (two 12V batteries in series)
Capacity: 9Ah to 12Ah @ C20