Step by step
General settings
122
dde . ehd w Enter MSN slot (001 ... 140).
e . h Select a ring type for the selected MSN.
w Initial status for programming mode.
Assigning a temporary MSN
This feature allows you to use a temporary MSN from
your own directory to make an external call. Or, to use
the "Key Assignment" feature to assign a key to an MSN
for monitoring incoming and outgoing calls (see key as-
signment - Using a temporary MSN to make a call, in
the User Manual).
Required: Programming mode must be activated (*95
31994).
dmg w Enter the programming code.
p w Enter the MSN number selected:
Example
User is at his/her office (3416496):
e = This setting specifies an MSN for other facilities
(e.g 3415565)
f = This setting specifies MSN slot
(001 ... 140) for other facilities
(for example 001)
w Initial status for programming mode.
t Replace the handset.
At this time, the called destination receives the informa-
tion that the calling number is 3415565, even though
the call has been originated from number 3416496.
MSN identification mode
Slot MSN
001 3415565 - Home
002 3416496 - Office
To Next Page
Loading...
