Programming an extension
89
Step by step
Defining timeout for external calls
Required: Programming mode must be activated (*95
31994).
fhd w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
p w Enter the length of time for the duration of external calls
for the specified extension (00000 to 64800 in 5-second
cycles), where 00000 = 0 seconds (default) ... 00036 =
180 seconds, etc.
p w Enter the next extension number.
or
r w Press this key.
Initial status for programming mode.
Day to begin timeout
This allows the user to define a day of the month on
which the timeout for external calls on all extensions
will begin.
The default setting for this feature is deactivated.
Required: Programming mode must be activated (*95
31994).
fhe w Enter the programming code.
p w Enter the end day for the time limit for external calls (01
to 31)
or
q Press the key to deactivate the feature.
w Initial status for programming mode.
To Next Page
Loading...
