Step by step
How to use this manual
4
How to use this manual
The steps for programming the system are presented
sequentially in graphic format under the column "Step
by Step" on the left side of each page.
Meaning of symbols:
Press the Flash/Fil key.
n Lift the handset.
t Replace the handset.
s Start conversation.
q, ll ,p... Enter numbers, keys, passwords, internal or external
phone numbers, etc.
w Wait to hear an audible tone through the handset or
speaker.
An extension is calling.
When enabling certain functions and procedures, a long
beeping tone means the activation was successful).
When enabling certain functions and procedures, short
beeping tones mean the activation failed).
System support technician
The system’s support technician is generally the person
responsible for programming your HiPath 1100. The sys-
tem’s support technician is equipped with the appropri-
ate tools and information to do this.
Assistance with troubleshooting
Contact your system’s support technician. If the prob-
lem is not solved, the support technician should call
Technical Support.
d
<<

>>
To Next Page
Loading...
Need help?
General