Siemens HiPath 1120 - Default Configuration of the LAN Interface; EVM Module

EVM module
167
Step by step
Default configuration of the LAN inter-
face
This restores the default configuration of the LAN inter-
face module.
ADSL modules
– Default IP of the module: 10.0.0.1
– Default Subnet Mask of the module: 255.255.255.0
SLIMC, SADSLIM, LIMC or ADSLIM modules
– Default IP of the modem: 192.168.254.254
– Default IP of the module: 192.168.254.253
– Default Subnet Mask of the module: 255.255.255.0
– Default Gateway of the module: 192.168.254.254
Required: Programming mode must be activated (*95
31994).
deg w Enter the programming code.
w Initial status for programming mode.
EVM module
EVM (Entry voice mail) is a voice mail solution for HiPath
1100 systems. Its features are controlled through he
keys on a system telephone or any type of equipment
with MF dialing capability.
EVM is configured and activated by technical personnel
through the HiPath 1100 Manager administration soft-
ware or a programming extension.
Feature Overview
• 24 default mailboxes, 2 of which can be used as for-
warding mailboxes (message/greeting for day or
night service).
• 4 virtual ports ( 744 to 747)
An EVM Module can operate simultaneously
with a Fax/DID facility except as follows: An EVM
is not configured for Auto-Answering, since this
capability is covered by the Fax/DID Module.