Siemens HiPath 1120 Programming Manual

Fax/DID
143
Step by step
Call answering mode Configuration
The Fax/DID Module’s Auto-answering mode must be
configured individually for each analog and digital line.
To a c t i va t e
Required: Programming mode must be activated (*95
31994).
efk w Enter the programming code.
p w Enter a number for an external analog or digital line
(e.g., 801).
d ... i Select the operating mode for the line:
d = deactivated
e = Fax
f = Attendant
g = Fax/DID
h = Greeting
i = Auto-Fax
p w Enter the number for the next external line available.
or
r w Press this key.
Initial status for programming mode.
To d ea c ti va te
Required: Programming mode must be activated (*95
31994).
efk w Enter the programming code.
p w Enter a number for an external analog or digital line
(e.g., 801).
d Enter the code to deactivate Fax/DID reception.
p w Enter the number for the next external line available.
or
r w Press this key.
Initial status for programming mode.

Siemens HiPath 1120 Specifications

General

Brand	Siemens
Model	HiPath 1120
Category	Telephone
Language	English