Siemens HiPath 1120 - Call Cost Limit for an Extension; Date for Updating the Call Cost Limit for an Extension

General settings
107
Step by step
emk
w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
p w Enter the maximum amount that can be spent by the
extension (up to 9 digits).
p Enter the decimal separator position (0 to 3)
Examples:
– for R$ 0.12: 000000012 and 2 (comma position)
– for R$ 2.00: 00002 and 0 (comma position)
– for R$ 123456.789: 123456789 and 3 (comma po-
sition)
w Initial status for programming mode.
Call cost limit for an extension
This setting limits how much an extension has available
for Call Charges.
Required: Programming mode must be activated (*95
31994).
dhh w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
q or r w Activate/deactivate call charge limit:
q = Activated
r = Deactivated (default)
w Initial status for programming mode.
Date for updating the call cost limit for an ex-
tension
This specifies a day for resetting the call charge limit.
Required: Programming mode must be activated (*95
31994).
dhi w Enter the programming code.
de.ge Enter a day for resetting the limit (01 to 31).
or
q To deactivate.