Step by step
Programming an extension
74
External CFW
Required: Programming mode must be activated (*95
31994).
dml w Enter the programming code.
p w Enter the extension number (e.g. 12/102).
q or r w To enable/deactivate External CFW:
q = Activated
r = Deactivated (default)
w Initial status for programming mode.
Call forwarding - Busy after call for-
warding no answer:
This option allows an incoming call to an extension con-
figured for call forward no answer (see User Manual.
Call forwarding - no answer ) can be forwarded to the
same destination configured if the extension is busy
when the call is made.
Required: Programming mode must be activated (*95
31994) and call forward no answer must be activated as
well.
eli w Enter the programming code.
p w Enter the extension number (e.g., 12/102).
Conditional call forwarding has priority over an
unconditional call forwarding.
Conditional call forwarding is not available for S
0
extensions.
function: The extension has external CFW and
the system is connected to a PC running a TAPI
application.
1. Conditional call forwarding rules and condi-
tions for a specified extension can be defined
by using a Windows TAPI application
2. Apply the settings to the extension desired.
3. From this moment on the extension will be
forwarded.
To Next Page
Loading...
