EVM module
171
Step by step
w Initial status for programming mode.
Mailbox assignments
When attendants are used for MSNs, this feature as-
signs mailboxes to users’ extension slots or virtual EVM
ports.
Required: Programming mode must be activated (*95
31994).
fdg w Enter the programming code.
de ... fh Enter the number of the mailbox you would like to se-
lect.
p w Enter the extension number (e.g. 12/102) that you wish
to associate to a mailbox or if you are using attendants
for MSN numbers, the "EVM Virtual port - 744 to 747"
(for example, 744) that will be associated.
r w Press this key.
Initial status for programming mode.
Mailbox password
Associates a password to a specific mailbox. The de-
fault password is "1234".
Required: Programming mode must be activated (*95
31994).
fdh w Enter the programming code.
de ... fh Enter the number of the mailbox you would like to se-
lect.
p w Enter a new password (up to 4 digits).
r w Press this key.
Initial status for programming mode.
To Next Page
Loading...
Need help?
General