General settings
117
Step by step
p
Enter the number for technical support.
r Confirm.
w Wait for a confirmation tone.
Remote software update
If authorized, the software can be update remotely.
qmhei Enter this code.
w Wait for a confirmation tone.
The software is sent by the service center.
Remote operation mode
This specifies the remote updating of the software. An
update can be carried out remotely over external digital
ISDN lines and analog lines via modem.
Required: Programming mode must be activated (*95
31994).
dlh w Enter the programming code.
e or f w Select the operating mode:
e = Via ISDN (default)
f = Via modem
w Initial status for programming mode.
Activating remote administration
This setting allows the system to be administered re-
motely.
Required: Programming mode must be activated (*95
31994).
djj w Enter the programming code.
q or r w Activate/deactivate remote administration:
q = Activated
r = Deactivated (default)
w Initial status for programming mode.
To Next Page
Loading...
