Siemens HiPath 1120 - Type of Equipment Connected to the Extension; Auto-Answering Mode

Programming an extension
85
Step by step
Type of equipment connected to the
extension
This setting specifies the type of equipment that is con-
nected to extension slot A/B or S
0
.
Required: Programming mode must be activated (*95
31994).
ddg w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
d ... i w Select the type of equipment:
d = Normal telephone (default)
e = Data (Fax/Modem)
f = Answering machine
g = Music
h = External door extension
i = Voice mail
p w Enter the next extension number.
ou
r w Press this key.
Initial status for programming mode.
Auto-answering mode
This setting specifies the use of Auto-answering mode
for the telephone by using a feature code (see functions
used for Making Calls - speakerphone Auto-answering
mode in the User Manual).
Required: Programming mode must be activated (*95
31994).
dgh w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
q or r w Activate/Disable permission to use Auto-Answering:
q = Activated
r = Deactivated (default)
p w Enter the next extension number.