Programming an extension
83
Step by step
r
= Disable (default)
w Initial status for programming mode.
External MWI group
The extensions configured for this group receive a Mes-
sage Waiting Indicator (MWI) signal from the external
voice mail server.
By default, no extension is configured.
Required: Programming mode must be activated (*95
31994).
dei w Enter the programming code.
p w .pw Enter the extension numbers (e.g., 11/101) to be includ-
ed in the external MWI group.
r w Press this key to finalize the entry.
Initial status for programming mode.
or
q Press this key to delete the extensions in the group.
r w Press this key to finalize the entry.
Initial status for programming mode.
Waiting Message Server Number
This setting specifies an MSN number for the Waiting
Message server.
By default, no MSN is configured.
Required: Programming mode must be activated (*95
31994).
dji w Enter the programming code.
The group must be activated to use this feature
(code 014).
The Message Waiting Indicator is signaled by
means of a LED key on system telephones and
by a distinctive audible tone on standard tele-
phones. In the case of a standard telephone ac-
tivated for CLIP FSK with MWI service the signal
can be configured to show an icon on the display
or some other type of indication.
To Next Page
Loading...
