Step by step
Programming an extension
84
p w Enter an MSN (up to 20 digits).
r w Press this key.
Initial status for programming mode.
Collect call barring by extension
When this blocking is activated, the system automati-
cally rejects all incoming collect calls over a digiital line;
calls received over an analog line are rejected only at the
moment they are answered.
Required: Programming mode must be activated (*95
31994).
emg w Enter the programming code.
p w Enter the extension number (e.g. 11/101).
q or r w Activate/Disable collect call barring:
q = Activate
r = Disable (default)
p w Enter the next extension number.
or
r w Press this key.
Initial status for programming mode.
If a call has been answered at least once by the
system, collect call barring cancels the blocking.
If an incoming call over a digital line is forwarded
because there was no answered (*14), and col-
lect call barring is activated, the call will ring at
the first attendant for the external line.
Please ask your local carrier about enabling
blocking on digital lines.
To Next Page
Loading...
