Digital trunk settings
163
Step by step
Busy signal
This features allows all telephones in the "busy signal"
group to automatically switch to a busy signal when an
extension of the group (that activate this feature) has a
call in progress.
External calls no longer ring (caller hears a busy signal).
This is useful when there is only one person of the
group available and this person does not want to be dis-
turbed by other external calls while there is a conversa-
tion in progress. The caller will think that the called per-
son is busy at the moment.
Required: Programming mode must be activated (*95
31994).
ddh w Enter the programming code.
dde . ehd w Enter the slot for the MSN number.
e or f w Choose a period of time for the assignment of MSN to
extensions:
e = Day
f = Night
dde . ehd w Enter the slot for the group with a busy signal.
dde . ehd w Enter the next slot for the group with a busy signal.
or
r w Press this key.
Initial status for programming mode.
This feature is valid only for digital lines with
MSN numbers. It is not valid if more than one ex-
tension is configured for an MSN number.
When the Fax/DID facility is configured for digital
lines, this feature is not operational.
To Next Page
Loading...
