Step by step
Report
134
Ticket account codes
External calls can be assigned account codes which
provide more control over telephone costs. This infor-
mation may be presented on the billing ticket. This ac-
count code is defined by the user and is made up of a
sequence of up to 10 random digits (0...9) which could
be, for example, the number of a court case (see User
Manual Functions used during a call - account code, in
the ).
If account codes have not been configured in advance
using the HiPath 1100 Manager (See account codes -
A31003-K1270-M100-*), only ten-digit account codes
will be accepted in analog and S
0
telephones. Other-
wise, the call will not be completed.
Required: Programming mode must be activated (*95
31994).
dmi w Enter the programming code.
q or r w Activate/Deactivate sending account code for call detail
report:
q = Activated
r = Deactivated (default)
w Initial status for programming mode.
It is important for the system’s support techni-
cian to guide users on the settings and proce-
dures involved in using this feature.
To Next Page
Loading...
