ADSL expansion boards
165
Step by step
ADSL expansion boards
These provide a LAN Ethernet interface via their RJ45
connectors that allow direct PC connections to the Hi-
Path 1100 within the network and if you have an ADSL
modem available, they can share ADSL access, dis-
pensing with the need for an external ADSL modem or
HUB.
The HiPath 1100 can interact via the LAN network with
the applications used in your administration, such as:
HiPath 1100 Manager, SNMP services, Interaction Cen-
ter Smart, Raters, etc.
ADSL modem access must be activated by a carrier for
one of the lines. An Internet provider is also required.
IM French South Africa 27
China 86 Turkey 90
Malaysia 60 Latvia 371
Singapore 65 Lithuania 370
Thailand 66 Italy 39
Greece 30 Australia 61
France 33 England 44
Korea 82
Do not connect the V.24 interface cable to the
PABX when using a network interface module.
All data is delivered through the network.
Remember to configure the ADSL connection in
the CommServer.
All the PCs must have a network card installed
and be in the same network as the ADSL expan-
sion board.
You can check details on the installation and set-
tings of the modules can in the Service Manual.
Country CAC Country CAC
To Next Page
Loading...
