General settings
99
Step by step
e
or f Select group 1 or 2.
p w Enter the extension numbers (e.g., 11/101).
r w Press this key.
Initial status for programming mode.
Deleting Extensions in a group
Required: Programming mode must be activated (*95
31994).
dlk w Enter the programming code.
e or f Select group 1 or 2.
q w To delete all extensions in the group.
r w Press this key.
Initial status for programming mode.
Music source for the MOH group
When an extension has a call on hold, the caller will hear
the music programmed for that extension’s group.
dll w Enter the programming code.
e or f Select group 1 or 2.
q.h Enter the code for a music source:
d = No music
e = Internal - MIDI (default)
f = Internal - WAVE
g = External
h = External – extension
r w Press this key.
Initial status for programming mode.
Music source extension
This is an extension to which a music source is connect-
ed.
No extensions are configured as a default.
dlm w Enter the programming code.
e or f Select group 1 or 2.
p w Enter the extension number (e.g. 11/101).
To Next Page
Loading...
