Siemens HiPath 1120 - External Analog Present

Step by step
External line settings
52
Required: Programming mode must be activated (*95
31994).
ffj w Enter the programming code.
p w Enter an access code consisting of a maximum of 5 dig-
its.
w Initial status for programming mode.
Default access code table by country
External analog present
System slots that are not connected to an external line
should be configured as "unavailable".
Required: Programming mode must be activated (*95
31994).
dkm w Enter the programming code.
p w Enter a number for an external analog or digital line
(e.g., 801).
q or r w Present/Absence of an external line
q = Presence (default)
r = Absence
r w Press this key.
Initial status for programming mode.
Country Code
Spain
Latvia
Lithuania
Australia
Greece
99
Italy 69
Portugal 6
Other None