Step by step
General settings
98
General settings
Music on Hold
You can enter music for external calls that are placed on
hold (MOH) using a music source:
• Internal: The caller on hold hears music generated
by the system;
• External: The caller hears music from an external
music source (e.g., a radio) connected directly to the
system’s external music input;
• External connected to an extension: The caller hears
music from an external music source (e.g., a radio)
connected to an extension.
In order to accomplish this, add extensions in two MOH
groups or do not assign any extension.
Required: Programming mode must be activated (*95
31994).
egj w Enter the programming code.
d.h Enter the code for a music source:
d = No music
e = Internal - MIDI (default)
f = Internal - WAVE
g = External
h = External – extension
w Initial status for programming mode.
Assigning extensions to MOH groups
Extensions can be grouped in two MOH groups.
No extensions configured as a default.
Required: Programming mode must be activated (*95
31994).
dlk w Enter the programming code.
Code 136 is used when there is no MOH group
assigned to the extension.
To Next Page
Loading...
