Step by step
General settings
118
External number configuration
This specifies external numbers (Service MSN without
external access code 0) that are able to perform Re-
mote Administration.
The default configuration does not specify an MSN.
Required: Programming mode must be activated (*95
31994).
djk w Enter the programming code.
e. h Select a slot for the external number (1 to 4).
p w Enter the external number (up to 20).
e . h Select the next slot for an external number.
or
r w Press this key.
Initial status for programming mode.
remote administration password
This feature assigns a password for enabling remote ad-
ministration using a specified external number (Service
MSN).
The default configuration does not specify a password.
Required: Programming mode must be activated (*95
31994).
djl w Enter the programming code.
e . h Select a slot for the external number (1 to 4).
p w Enter a password (5 digits).
e . h Select the next external number.
or
r w Press this key.
Initial status for programming mode.
Remote MSN
This setting specifies an MSN of your ISDN line as the
Remote Administration MSN.
The default configuration does not specify an MSN.
To Next Page
Loading...
