Setup and Installation
229
2 Model S30817-Q936-C282
2.1 Settings
• J1
ON: Works as a pager
OFF: Works as an entrance telephone.
• J2
ON: Deactivates the timeout for paging.
OFF: Activates a 15-second timeout for paging.
• J3 to J8
Not used
Aspects to Consider
• The length of the cables between the X2 connector and the PABX must
not exceed 32.8 feet.
• For information on the length of wiring between the X6 connector and
the entrance telephone (at the street) see the manufacturer’s specifi-
cations. This interface supports HDL’s brand entrance telephones
(F5AZ, F8AZ and F9AZ).
• In Pager Mode the X4 connector is connected to an audio output, and
the X5 connector to an audio input.
• For more details see the Service Manual.
To Next Page
Loading...
