Siemens HiPath 1120 - Page 14

Features and options
14
– TME1 Module
Allows you to connect a digital line with E1 CAS or S2 accessÆ page 158.
– CD 16 Module (HiPath 1190):
This module is used for connecting up to 16 KS-type system telephones.
• Optional modules
– EVM Module:
Provides voice mailbox features Æ page 167.
– ADSL expansion boards: These provide a LAN Ethernet interface via their RJ45 con-
nectors that allow you to set up a LAN, as well as providing access to and from this
network. The module used may also be equipped with an ADSL (Asymmetric Digital
Subscriber Line) modem, on which it is possible to receive high-speed data and voice
(up to 8 Mbit/s) through a single pair on a standard telephone line (POTS).
In HiPath 1100 V6.0, there is an ADSL module equipped with ADSL modem func-
tions and a LAN interface together on the same slot Æ page 165.
In HiPath 1100 V7.0, there is a LIM module (ADSL expansion board) and the ADSL
modem can be mounted optionally on this slot.
- HiPath 1120: SLIMC module and SADSLIM module;
- HiPath 1150/1190: LIMC module and ADSLIM module;
– Music module (HiPath 1120):
Makes it possible to play music for calls on hold. The music input is provided by an
external music source, such as a radio connected to the system Æ page 98.
This module also features a relay and a sensor for supporting additional devices such
as entrance telephones, door openers, alarms, etc. Æ page 177.
– TFE entrance telephone Interface:
Makes it possible to connect an entrance telephone to an extension slot or as a pager
interfaceÆ page 126.
• Optional software:
– Interaction Center Smart:
It provides management resources for Call Centers including real time information
and preconfigured reports.
– TAC Smart - Telephony Advanced Control (optional software):
With the Telephony Advanced Control Smart you can identify callers on your comput-
er monitor, including for calls received over an analog extension. This software also
provides complete control of the telephone through a Windows interface (for making
calls, answering and transferring calls, call forwarding, and so on...).
– CallReprt is a billing system that allows you to record information about calls originat-
ed or received by your PABX system.
When a UP
0/E
module is connected to the HiPath 1190, the CD 16 module is
deactivated. On the HiPath 1120, the CD interfaces will be deactivated.