Rapidlab 1200 Operator’s Guide: Index I-5
02087462 Rev. V
performing 4-1
QC material
contents of automaticQC cartidge 1-4
QC options 4-1
QC results
recalling 4-7
search 4-8
QC samples
about QC analysis 4-1
analyzing QC samples 4-1
selecting QC syringe type in setup 8-13
QC syringe type
turn on or off at analysis screen 8-13
quarterly maintenance 5-10
R
R cartridge valve test 6-41
rapid sample identification
selecting in setup 8-9
Rapidlink and Rapidcomm systems
communication problems 6-12
connecting the system to a Rapidlink or Rapidcomm
system 8-27
using a CompleNet network connection 8-28
using a serial connection 8-27
send calibration results 3-4
send patient results 2-27
RCx cal test 6-36
reagent cartridge
replacing 2-3
reagent flow tests 6-36
reagent manifold
replacing 5-17
reagents 1-9
calibration points 1-9
recalling
calibration results 3-4
patient results 2-30
QC results 4-12
reference electrode
illustration 1-32
reference methods E-72
reference sensor
checking fill solution 5-8
cleaning 5-34
replacing sensor 5-29
reference sensor maintenance 5-36
refilling
measurement sensors 5-32, 5-40
reinstalling the automaticQC cartridge 2-4
relocating the system 5-49
remote viewing
enabling 8-32
setup 8-32
using buttons in banner 8-34
remote viewing status in banner 1-20
removing obstructions
CO-ox sample path 6-31
sample path 6-24
replacing
air filters 5-20
automaticQC cartridge 2-3
automaticQC manifold 5-19
CO-ox lamp 5-43
CO-ox module tubing 5-13
CO-ox roller cage 5-45
CO-ox sample chamber 5-9
measurement module tubing 5-12
pinch valve tubing 5-10
printer paper 5-42
reagent cartridge 2-3
reagent manifold 5-17
sample port 5-42
sensors 5-29
system fuses 5-47
wash cartridge 2-2
waste bottle 2-2
reports
calibration(examples) 3-3
effects of changing units of measure 8-15
representative
authorized B-1, B-9
required QC analysis 4-1
benefits of using 4-1
defined 4-1
effect of turning parameters off and on in setup 8-14
turning on the bar code scanner 8-23
respiratory index
description 1-61
restore system setup data 8-41
restoring parameters 4-12
result symbols
calibration 6-5
patient 2-27
QC 4-6
results screen 2-27
retaining automaticQC ranges 8-6
RiliBÄK 8-2
S
sample analysis 3-1
viewing number of samples analyzed 7-4
sample devices
anticoagulant requirements 2-7
fill volumes C-1
patient samples 2-7, 2-8
sample ground/temperature sensor
replacing sensor 5-29
sample path
cleaning 5-22
deproteinizing 5-4
sample port
replacing 5-42
sample pump test 6-38
To Next Page
Loading...
