Simplex 4100ES - Appendix E References to 4100 ES Module Installation Instructions

E-7
Appendix E
4100-9816 MASTER CLOCK INTERFACE KIT 574-913
4100-9832 SERVICE MODEM MODULE (566-276) 574-046
4100-9833 4020 RETRO-FIT KIT 579-229
4100-9854 4100 Module Legacy Bay Mounting Kit 579-913
4190-9018 FIBER MODEM AUDIO Exp BOARD 579-581
4905-9835 Temporal Code 4 Module 579-840
4907-9001 TrueAlert Text Messaging Appliance 579-829
Notes:
1. The current for all LED and Switch modules is included with the current for 4100-1288 and 4100-1289.
2. Amplifier standby current has two settings. The .085 A number is used if the System Option for
"Audio Power Conservation" is selected. This option shuts down the power stage when operating
on secondary power (battery standby).
3. Add .8 mA (standby) / 1 mA (alarm) per device to calculate the current requirements for 
4100-3101, 4100-3104, 4100-3105, 4100-3106 or 4100-3107 module.
4. Add 1.7 mA per device to calculate the current requirements for 4100-3102 MAPNET module.
Table E-1. References to 4100ES module installation instructions (Continued)
PID Description Installation
Instructions
References to 4100ES Module Installation Instructions (continued)