Targets ECDIS-E User Guide
9-16 65934012
5. The MKD will be removed from the screen after a short period of
inactivity. To re-enable the MKD left click in the message field
again.
6. To clear a message press the Clear button, to cancel the send
action press Cancel.
7. When you have compiled a message click the OK button, the MKD
is removed from the screen, to return the MKD click in the message
field again.
8. To send the message, click the Send button. When the message
has been successfully sent to the AIS vessel a temporary prompt
`Message Sent’ appears in the Prompts field.
To Next Page
Loading...
